Print PDF
Favorite
Email
Step 2Make the vertical paddles
Cut 4 strips of cardboard 4" x 10". These will be the vertical
paddles that catch the wind. Cut two rectangular notches in each
paddle. Each notch should be 3 inches long and just wide enough that
the disk will fit in snugly. These notches will be located 1 inch from either side of the ends of paddles.
paddles that catch the wind. Cut two rectangular notches in each
paddle. Each notch should be 3 inches long and just wide enough that
the disk will fit in snugly. These notches will be located 1 inch from either side of the ends of paddles.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
