Instructables

Cardboard Skateboard

Featured
Picture of Cardboard Skateboard
Check out how to make a skateboard deck out of Cardboard
 
Remove these adsRemove these ads by Signing Up

Step 2: Stack and Glue

Picture of Stack and Glue
IMG_0078.JPG
Make 7 identical rectangle cuts which should be slightly larger then the deck you want to create.

IMPORTANT: for strength you want the cardboard to be stacked in a cross hatched pattern so lay the first layer with the grain going vertical and the second layer going horizontal. See image below if confused.

One layer at a time dampen the cardboard slightly (improves Gorilla Glue Adhesion) then apply a even layer on the glue, and then set next layer of cardboard on top, repeat process for all seven layers.

You will then need to put some sort of weight on the top layer to smash it all together. I use some big car batteries, but just about anything will work. ie: cinder block, heavy text books, bricks, dead bodies....

now wait about 24 hours for the glue to set completely

Step 3: Cut out shape

Picture of Cut out shape
IMG_0085.JPG
IMG_0129.JPG
This shape is up to you, but I recommend a big fat board. Its made out of cardboard people, surface area is your friend here. Find something with a nice curves and trace around to make a nose of the board, then use something straight to make the side rails. I traced a wheel I had laying around for the curve nose, used a ruler for the side rails then the wheel again for the tail.

This can be a rough template because we will do some fine tuning later, once we add the Plexiglas.
knexpert10111 months ago
I've been looking to make something like this for a long time
dmattioli1 year ago
you need to flip your front truck
This is cool. Nothing against you, but for the contest limits, this is excellent. But for riding, doing tricks, and ramps this might break easily especially on grinds. Overall, for what you used, this is AWESOME!
Very cool design, but would it be possible to make a concave shape to it and a kick tail? if not this is still a cool DIY project
 thinking about that as well, maybe if you clamped it with something underneath so that it had a concave shape.
One of my friends did that :) It works!
you would need a vacuum press to make the tail(and nose if you wanted) im not sure about pressing plexiglass though
ur dogs real cute
JoeMurphy (author)  zombiesurvival2 years ago
thanks!
bradleyrxz4 years ago
you put one of the trucks on backward in this picture, and um, why make a baord out of cardboard when you can use oh say, wood?
hay be nice. he is just making something he is interested in. dont put him down for doing something that ovbiously sparked your interest as well noting that you commented on this instructable...
JoeMurphy (author)  jfilutze2 years ago
thanks @jfulutze ;)
JoeMurphy (author)  bradleyrxz2 years ago
here we go again

Previous Comment:
Good eye sir... if you look the trucks arn't even bolted in place, this pictures was taken when the board was still in the mock-up stage. The reason I went with cardboard was because it was for a contest where the materials where limited to cardboard and gorilla glue.
i wanna make this for a grass board
JoeMurphy (author)  bradleyrxz4 years ago

Good eye sir... if you look the trucks arn't even bolted in place, this pictures was taken when the board was still in the mock-up stage. The reason I went with cardboard was because it was for a contest where the materials where limited to cardboard and gorilla glue.  

splazem2 years ago
Cool beans!
edina20152 years ago
Does it support an average persons weight?
riguy982 years ago
Not really a cardboard skateboard if you used plexiglass
do u have any sub for pexiglass? houshold item if posible
you can prob use think ply wood, a different skate board, or anything flat, hard and big
jonchow963 years ago
Is there an alternative to plexiglass? Thanks in advance :)
are those randals? it's hard to tell from a distance........
fdf 
bran0944 years ago
not to be mean, but wouldnt it break or bend easily?
this makes me nervous
I'll post a video soon...it might make you less nervous
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!