Cardboard Tube Blade

Step 2 Blade

the wrapping papper tube will bee the blade on the sword. All you really have to do is use the duct tape to tape over any rips in the tube. DO NOT TPAE OVER THE HOLES ON THE TOP AND BOTTOM OF THE TUBE. If you happen to have an extra toilet papper roll or a papper towl (which is what I used roll you can attach a bracer. To make a bracer you have to cut the extra tube down the middle long ways. Wrap it tightly around the blade and tape it there. you can also make a hilt bracer. Cut a thin strip of cardboard and wrap it around the blade just above where you want the hilt to be. Then tape it in place