Print PDF
Favorite
Email
Step 2Start constructing the top.
One large flat piece box is used for the table top. Lay it on the floor, putting the side you eventually want to use for the top face down. This will give us a nice flat top when we are done.
You are going to glue your tubes from the previous step perpendicular to the ribs in the cardboard for the top. Leave some extra cardboard around the edges, because we are going to wrap that cardboard around the edges to finish it off. Glue the pieces with the double thick face down and just butt them up to one another.
You can see my tubes here all glued down and ready for the next step.
You are going to glue your tubes from the previous step perpendicular to the ribs in the cardboard for the top. Leave some extra cardboard around the edges, because we are going to wrap that cardboard around the edges to finish it off. Glue the pieces with the double thick face down and just butt them up to one another.
You can see my tubes here all glued down and ready for the next step.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
