Introduction: Cardboard Nook Case

Picture of Cardboard Nook Case

Hello,
Today I will be making a cardboard Nook case

You will need:
-Nook (picture 1)
-cardboard
-duct tape
-magnets(optional)
-scissors
-Shop cat(optional but recommened)

Step 1: Start

Picture of Start

First cut cardboard to good working size and put nook on and fold around nook

Step 2: Cutting

Picture of Cutting

Now make a line half an inch and cut for bottom and top flaps.  Then try to make holes for buttons and screen, than cut out. 

Step 3: Tape

Picture of Tape

Now tape it all together.

Step 4: Flap

Picture of Flap

Now take a flap the size of the front and tape so it can hinge

Step 5: Done

Picture of Done

Now put the nook in and read.

Comments

beckey88 (author)2017-03-14

Very Creative! i have been looking for a way to do something similar and i think this just made me figure out the parts that are stumping me! Thank you

About This Instructable

2,104views

5favorites

License:

Bio: Hello, I make stuff.
More by builderkidj:Lego HeadphonesCardboard BookCardboard nook case
Add instructable to: