Instructables
Picture of Carniverous alien legwarmers
100_1364.JPG
100_1360.JPG
These fuzzy alien creatures are starving and have a taste for human brains.  Unfortunately they are somewhat short and will have to start with your legs. 
 
Remove these adsRemove these ads by Signing Up

Step 1: Gather supplies

Picture of Gather supplies
Green minky fabric, 1 yd
Brown rib knit fabric, 1 yd
small amount of felt, black and white
Fabri-Tac
Scissors, rotary cutter, and cutting mat
Rulers
1/4 inch elastic, 3 yds
small amount of polyfill
all purpose thread
sewing machine
serger with thread

Step 2: Cut fabric

Picture of Cut fabric
100_1253.JPG
100_1254.JPG
Lay out the minky and cut 2 rectangles, each 17 X 25 inches.  Make sure that the stretch goes agross the width.  You want it to stretch around your leg not down it. 
Repeat with the rib knit fabric so that you have 4 rectangles total.

Lay the minky on the table with the rib knit on top, right sides together. 

Serge across the short sides (17inch).

Turn right side out.   Repeat with the other fabric pieces.

Step 3: Add elastic

Picture of Add elastic
100_1336.JPG
100_1338.JPG
Now you'll need to make the casings for the elastic. 
You need one at each end of the legwarmer and another to make the creature's head.

Measure 1 inch away form each short side.  Mark a line across with chalk. 
For the creature's head, measure 3 1/2 inches down from the top casing line and mark across with chalk.  Measure 1 inch down for the elastic.

Stitch down the chalk lines on the sewing machine. 

Cut elastic to fit and pull through each of the casings. Pull slightly and secure each end with the sewing machine.  You don't want the elastic to be very tight or it will be uncomfortable.

Step 4: Finish sewing

Picture of Finish sewing
100_1341.JPG
100_1347.JPG
Stuff the head segment lightly with polyfill. 
Pin long edges together with right sides together. 
Serge the long sides.  Do this for both legwarmers.

Turn legwarmers right side out. 

Step 5: Add eyes and teeth

Picture of Add eyes and teeth
100_1353.JPG
100_1354.JPG
100_1357.JPG
100_1361.JPG
Take the white felt and cut 2 rectangles measuring 2 X 6 1/2 inches. 
Cut triangles out across one edge of each rectangle for teeth. 
Use Fabri-tac to attach teeth inside of the lip.
Cut lemon shapes out of the black felt for the eyes. 
Attach to the head with Fabri-tac.
Let it dry before wearing.
I will turn these into socks
OMG! I'm seeing these as Cthulhu!!! :D
I have got to try this! What an excellent idea! Thanks so much for sharing :)
Yeaaaah....THOSE ARE LITERALLY THE CUTEST THINGS I HAVE EVER SEEN.

:) Thanks for sharing!
gingerkatt (author)  halloweengirl802 years ago
Thanks!
Fun AND practical - 2 thumbs up!
MaryT8M2 years ago
VERY cute......almost makes me wish it got cold here so my Grandson could wear these!
This is hilariously adorable! Just amazing!
gingerkatt (author)  Penolopy Bulnick2 years ago
Thanks! :)