Introduction: Carver's Mallet

Picture of Carver's Mallet

Make a carvers mallet from scrap around the workshop.

Step 1: Wood

Picture of Wood

Cut wood stock for the handle and head of the mallet.

Step 2: Glue

Picture of Glue

Glue all the pieces together.

Step 3: Turn

Picture of Turn

Turn the piece on the lathe until it is the desired shape.

Step 4: Trim

Picture of Trim

Trim the excess.

Step 5: Sand

Picture of Sand

Finish sanding by hand.

Step 6: Finish

Picture of Finish

Coat in finishing oil.

Step 7: Carve

Picture of Carve


About This Instructable




More by djpolymath:Pasta Drying Rack (compact)Grommet BootsApartment Workshop
Add instructable to: