Print PDF
Favorite
Email
Step 2Remove the Door from the Gate
To make this project easier, we need to remove the actual door from the gate.
This isn't difficult. The door is held in by a spring-loaded hinge pin with an E-clip on the bottom.
Push on the hinge pin and the E-clip becomes visible. Grab the clip with your needlenose pliers, and yank it off. The spring will push the pin past the top of the hinge, and you can pull out the whole assembly.
The door will then lift right off. Bring it to your workspace.
This isn't difficult. The door is held in by a spring-loaded hinge pin with an E-clip on the bottom.
Push on the hinge pin and the E-clip becomes visible. Grab the clip with your needlenose pliers, and yank it off. The spring will push the pin past the top of the hinge, and you can pull out the whole assembly.
The door will then lift right off. Bring it to your workspace.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
