Print PDF
Favorite
Email
Step 4Making the house
Making the Cat House
Start by measuring a 6" x 6" square about 1" up from the bottom, in the lower corner of the cooler. Then drill a hole in each corner large enough for a jig saw blade to fit in. Cut the square out.
Mount the piece of carpet to the inside of the cooler with 3 - #8 wood screws, making sure the doorway is covered completely. Then cut a slit about 3" long up the middle of the carpet. This makes it easier for them to exit.
Start by measuring a 6" x 6" square about 1" up from the bottom, in the lower corner of the cooler. Then drill a hole in each corner large enough for a jig saw blade to fit in. Cut the square out.
Mount the piece of carpet to the inside of the cooler with 3 - #8 wood screws, making sure the doorway is covered completely. Then cut a slit about 3" long up the middle of the carpet. This makes it easier for them to exit.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
