Print PDF
Favorite
Email
Step 3Cutting up the PVC
I'm not going to give out the measurements since I based them around the size boards I had on hand and the height I needed to make this to fit out window.
My logic went like so... how long to cut the piece of tube that is between the 90deg elbows to come up with the 11.5" width of the board. Same thing for the "T" to 90deg elbow. I started at the top and worked my way down. Once I had one side figured out, just copy the cuts for the other side.
My logic went like so... how long to cut the piece of tube that is between the 90deg elbows to come up with the 11.5" width of the board. Same thing for the "T" to 90deg elbow. I started at the top and worked my way down. Once I had one side figured out, just copy the cuts for the other side.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
