Print PDF
Favorite
Email
Step 5Mark The Length On The Housing
On the upper housing there is a stalagmite-looking projection that the arm rides against. Turn the housing upside down and our stalagmite now looks like a hole. This hole is going to be our starting point.
With one hand, hold one end of the arced piece of mat against the lip of the housing, with the inner arc upward. With the other hand follow it down to the other end of the mat, and (releasing the start end) mark it there.
This gives us the area of the housing to apply the adhesive to.
With one hand, hold one end of the arced piece of mat against the lip of the housing, with the inner arc upward. With the other hand follow it down to the other end of the mat, and (releasing the start end) mark it there.
This gives us the area of the housing to apply the adhesive to.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Aug 24, 2009. 6:12 PMki4aoa
says:
Step 5 is where I had to deviate from the plan. My granules where piling up further back than the instructables author, so I had to start the shield further back. I started mine about 4 inches before the "stalagmite."
Reply
 |
Add Comment
|
