Print PDF
Favorite
Email
Step 6Mount the Switch
Use the utility knife to cut a hole in the case to put the switch.
Use the hot glue to secure the switch in place. One thing about hot glue, it doesn't stick to anything, but it is good for squirting in a mechanical/friction fitting. Note the huge globs.
Use the hot glue to secure the switch in place. One thing about hot glue, it doesn't stick to anything, but it is good for squirting in a mechanical/friction fitting. Note the huge globs.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
