Ceiling Fan LED Display

Step 11 Another image, and code

Another image, Arduino sketch, board layout and image spread sheet. Once a picture is inserted into the SS, size, move and send it to the background. As the boxes are checked off, the image code changes below it. Copy and paste into the sketch and upload!

Comments

[crazyrog17]

http://www.mediafire.com/?sharekey=53759a2d239edc74d8f14848abf485dde04e75f6e8ebb871

I made one. =)

[ck lau]

Hi! Crazyrog17, Very nicely designed, is a brilliant idea, so may be I can use my picture on it? Thanks.

[UncleBone]

Very Nice! crazyrog17 sent a really great looking image. I put it on the top of the video step since it had no image. Thanks

[crazyrog17]

My pleasure! Thanks for posting it! My thumb went numb clicking on my trackpad, but otherwise I'm glad to see the result! One thing to note though was the clear all button in the SS didn't work.

[UncleBone]

You need to have macros enabled under Tools > Macro > Security. Also, it takes a little time to loop through and clear them all. It is a lot of clicking. I should also put a "All ON" button and a "Negative Image" button. Because of the hole created in the middle, negative images seem to work best if the hole can be made part of the image. Thanks again