Step 5: Installation
The installation process is was a big pain and is very specific to the type of diffuser bowl and mounting my ceiling fan has. My ceiling fan has two pulls. One controls the fan and the other controls the lights. The pull chain which controls the fan passes through a hole in the diffuser bowl's mounting hardware. This hole is only wide enough to pass one male header at a time. I removed the fan's pull chain from the hole and rerouted it so that it now hangs over the side of the diffuser bowl. Then I attached the modified pull chain to light's pull chain connector. Next I threaded both male connectors through the hole and connected them to the female headers on the battery holder. I had to do this while working in the tight confines of the bowl. It would have been easier if I'd left more wire connected to the LED so that I could have made the connection outside of the bowl, then simply wrapped the excess around the battery holder before placing it in the bowl.