Print PDF
Favorite
Email
Step 4Fitting the USB
Before i put the USB into the cork i wrapped it in electrical tape just to stop the cork shavings getting inside it. Don't put too much tape on or the USB will get bigger and you'll have to cut a larger hole.
When i had put my USB in the hole there was a small gap around the top edge of the hole so i used an elastic band to fill it in.
When i had put my USB in the hole there was a small gap around the top edge of the hole so i used an elastic band to fill it in.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
