With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here are step-by-step instructions on how to put a cloth diaper and diaper cover on a baby.
For this instructable, you will need a cloth diaper, a diaper cover and a "snappi" clip.It is important to assemble your materials so that everything ...
In this regard, changing a cloth diaper is like changing any diaper, but it bears mentioning:It's easier to change the baby if you have him or her pos...
Put the diaper under the baby. Fold the left edge of the diaper so that about a third of the diaper is under the baby's buns. The pre-folded part of t...
Holding the baby's feet in your left hand, use your right hand to fold the right edge of the diaper in thirds. Keep the top edge of each third lined u...
Bring the folded rectangle of cloth between the baby's legs.Now spread the top edge of the rectangle out across baby's belly.
Bring the back corners of the diaper under the baby around so they meet the front corners of the rectangle you just widened. Hold with your left hand....
The snappi is shaped like a "T". Hook the top part of the T to the back corners of the diaper, and the leg of the T to the front rectangle. Ta-da! The...
The diaper's job is to absorb and contain baby's poop and pee. The diaper cover's job is to make sure the diaper is isolated from the baby's clothes.U...
Fasten the "arms" of the diaper cover around the front. It's not important to make it super tight, it's only important that it covers all of the diape...
Check to make sure the diaper is snug and the diaper cover is covering all of the diaper.You're done!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »