With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I've had this bike for a while and have decided it's time for an oil change as I've not done that yet on this bike. so here we go. first, it helps to ...
to remove the clutch cover to access the centrifugal oil filter you'll need to remove the clutch side crankcase cover. This requires the removal of th...
Make sure you use the correct screwdriver there are many types of "phillips" screws. they are NOT the same. These screws are easy to strip the phillip...
breaking loose the cover is easy with a couple taps of a rubber mallet
I didn't have a replacement gasket on hand so I tried to save as much of the gasket as possible and will be sealing it with gasket maker upon reassemb...
clean out any sludge you see as well as anything you might find in the centrifugal filter
I'm pretty sure that this is from my grandpas time and probably highly toxic but it works wonders!
clean the screen well and check for any metal filings.
before putting the bike back together I decided to do some polishing... it's easier with the parts off... and why not?
After putting the bike back together and filling the fluids of course! after a short ride make sure everything is torqued correctly and there are no ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »