Print PDF
Favorite
Email
Step 14If only doing the Water Pump
If you just want to change the pump and don't want to deal with the belt biggrin.gif
As the idler pulley is attached to the pump, you'll have to hold back the T-belt with a bit of wire. Once the belt is taken care of, just remove the water pump as instructed above. The spacing is more tricky, but it should not be as involved as doing the T-belt. Thanks Sailor626 for getting the picture :D
As the idler pulley is attached to the pump, you'll have to hold back the T-belt with a bit of wire. Once the belt is taken care of, just remove the water pump as instructed above. The spacing is more tricky, but it should not be as involved as doing the T-belt. Thanks Sailor626 for getting the picture :D
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Mar 24, 2007. 12:38 AMhome mech
says:
Reply
 |
Add Comment
|
