Print PDF
Favorite
Email
Step 2Measure
Determine the shape that you want to make.
If you use bendable material like I did, don't make the shelves to long. Make your corners so that they give good support. A 90 degree corner is best, but you can make it a little more or less to make a nice shape.
The best method is to make a sketch, and then mark out the corner points on the wall. Once you have these you can measure the distance in between them. Write the measurements in your drawing.
By the way, you don't need to be super-precise. If you make a little error the shelves will still fit because not all the corners are connected to the wall.
If you use bendable material like I did, don't make the shelves to long. Make your corners so that they give good support. A 90 degree corner is best, but you can make it a little more or less to make a nice shape.
The best method is to make a sketch, and then mark out the corner points on the wall. Once you have these you can measure the distance in between them. Write the measurements in your drawing.
By the way, you don't need to be super-precise. If you make a little error the shelves will still fit because not all the corners are connected to the wall.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
