Introduction: Charge & Use OTG at Same Time in Tablet Pc

my iball tablet has only one micro Usb port to charge & otg so I cant charge tablet when i use keyboard &mouse or any other device.

I make a solution for this problem

video link on youtube

Step 1: You Need :

Picture of You Need :

1- Micro usb charger module 4056

2- soldering iron

3- wire

Step 2: Pick Up Wire From Tablet

Picture of Pick Up Wire From Tablet

Open tablet back cover and find tablet battery + & - point

solder this point with two wire.

now make a small hole for wire out.

close back cover.

Step 3: Solder Charger Board

Picture of Solder Charger Board

solder charger board (v out) to wire picked from tablet battery point.

close back cover.

and test it .charger board indicator will blink.

Comments

iRedTiger (author)2017-02-22

Easy guide, how to broke your tablet...

Technoreview85 (author)iRedTiger2017-02-23

but my tablet is still working good

About This Instructable

359views

7favorites

License:

Bio: please visit my youtube channel Technoreview85 for more DIY project.I make new project regularly link-- https://www.youtube.com/channel/UCQeXzgRuWxVPpJjeWUB65Dw/
More by Technoreview85:Remote Control for Light Easy WaySteadicam for Smartphone Videography  Light Control Brush Robot
Add instructable to: