Step 5: FEM Validation 3/3
Some final remarks on the FEM validation:
- Make sure you know what you are doing using FEM otherwise you could end up with unreliable results.
- Load scenario's are dependent on the situation where you are designing for. In our case the load scenarios were based on "rules of thumb" for solarcar design and we used a sfaetyfactor of 2.
- Make sure you know what you are doing using FEM otherwise you could end up with unreliable results.
- Load scenario's are dependent on the situation where you are designing for. In our case the load scenarios were based on "rules of thumb" for solarcar design and we used a sfaetyfactor of 2.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
