Instructables

Cheap ($5-$10) IKEA Collage Frame

Step 4: Prepare the Frame to be hung

Picture of Prepare the Frame to be hung
streched.JPG
finished hooks.JPG
On the older Racket frame, I went for an "Industrial" look and used drywall screws that would be visible from the front of the frame. 

For the Ram frame, I decided to add eyelets to make the frame look a little cleaner.  In order to get the mounting screws to fit, I used needle nose pliers to bend out the thin brass wire into a hook.  This is what I had available, you could use a hook, picture frame hanger, wire, or just screws.
 
Remove these adsRemove these ads by Signing Up