Instructables

Step 2: Lath wood

Picture of lath wood
In this step you will need: lath wood ,spray paint, sander.

Many people say that lath wood is Unsandible, yes i just make that word up, but people say is can not be done. I disagree, it cant be done if you are not using a circular sander.

so lets get started

When you get your lath wood you will notice it is not straight, this is Ok lath is no lath is.
First sand your wood until smooth do this for all of them (ONLY ONE SIDE NEEDS TO BE SANDED) now take your lath and put it under the pencil mark. REMEMBER LATH IS NOT STRAIGHT SO PUT THE LATH UP TO THE LINE UNTIL IT STARTS TO BEND THEN MARK IT AND CUT IT AND DO NOT DISCARD THE THE LEFT OVER WOOD SIMPLY PUT IT RIGHT NEXT TO THE PIECE YOU CUT IT FROM AND KEEP GOING UNTIL YOU FIRST LAYER IS DONE. YOU ARE NAILING IT TO THE WALL.
 
Remove these adsRemove these ads by Signing Up
rcisneros3 years ago
Safety.

Your really shouldn't be doing this in bare feet.

Cool project. Congrats.