Print PDF
Favorite
Email
Step 3Affix nut to magnet
After sanding the magnet, adhere one of the 1/4" hex nut to the magnet with hot glue.
I use one dab of glue on the magnet to set the nut, then fill the threads with glue (the threading on the nut helps everything adhere as well).
I use one dab of glue on the magnet to set the nut, then fill the threads with glue (the threading on the nut helps everything adhere as well).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
