Step 1: Painting & light
Take apart the florescent light. You only need the power supply, light, light socket part and switch.
Then I positioned the light so it was in the middle of the case; using hot glue and rivets I secured the light in place.
Note: Got new two setting hot glue gun. Two setting: Low = normal glue gun, High = burn yourself, stays runny way longer and oh ya burn yourself.
Step 2: Cord switch action...
The cord for the light was about 12 feet long so I cut it to about a foot. I kept the plug/transformer and hot glued that at the bottom/back of the case. Didn't use the original cord because I wanted it detachable.
Note: Slide on speaker clips, with some pushing will slide right over the prongs for the plug. Why mess with something that works?