Instructables

Cheap/free capacitor bank and charger

HOW TO: Make a capacitor bank useful for many applications, ie a railgun, coilgun, RFID zapper, for $0~50 depeneding on what tools you have and how fancy you want the final product.

**Now with solid state trigger**
 
Remove these adsRemove these ads by Signing Up

Step 1: Gather Materials

I have modified the circuit to use a solid state trigger, an SCR. I used this one, number from digikey: S4020L-ND
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=S4020L-ND

400v, 20A so ~200A surge, less than $2

The pins are, from left to right: Anode; Cathode; Gate
The SCR is essentially a diode, so be sure to hook the negative of the caps to the cathode and the anode to one of the binding posts. The positive of the caps also goes to a binding post. When you put enough current (check the chip spec, only a few volts and ma IIRC) through the gate it is "closed", allowing current to flow through it in the right direction. It will stay "closed" until the current flow stops, IE the caps are completely drained. Then you can just solder up a switch to the positive lead from the battery holder to the gate, this way you will be able to discharge even when the switch is off. I will put a new schematic up soon.

I applied all this to a coil gun and will write it up soon. This is just and update for those who request a solid state switch.

*****************************************************************************************************
Keep in mind that this is my first instructable, hell it's my first time wielding a soldering iron. Comments appreciated :D

The cheap way: (note that if you choose to go this way you should skip to step 4)
$0.00 (4) Disposable cameras You can get these for free used
$0.00 (X) Scraps of wire I used the wires from an old stereo system
$7.99 (1) Spool of solder (with soldering iron!)
$4.99* (1) Spool of 12 AWG wire.
$3.68* (1) Electrical tape
~$12

Assuming you already have everything but the 12AWG stuff, which you probably do, that's only $5. Hell, you could probably get away with paperclips if you were really trying to get it done cheap.

Required materials:
$0.00 (4) Disposable cameras You can get these for free used
$0.00 (X) Scraps of wire I used the wires from an old stereo system
$1.39 (1) LED holders (package of 2)
$1.49 (1) Green LED (package of 2)
$1.49 (1) Red LED (package of 2)
$3.00* (1) Toggle Switch
$1.49 (1) 2AA Battery Holder
$3.69 (1) Project Box
$4.99 (1) Binding Posts
~$17

Things you probably have but might not:
$7.99 (1) Spool of solder (with soldering iron!)
$4.99* (1) Spool of 12 AWG wire.
$3.68* (1) Electrical tape
~$38.20
*I just guessed the prices of *'ed items

I got all those parts at radio shack, expensive but that's what I pay for convienence.

Tools:
Soldering Iron
Multimeter
Drill
Assorted drill bits
Scissors

Note that I took the picture after I finished the project...
hopelost99 months ago
so im kinda confused with the capacitors. do you treat the line of capcitors as one, and just attach the first one to the charger, and they will all charge? or something else?
corax7 years ago
It seems this relatively simple design would work for an emp generator experiment?
montdor1 corax1 year ago
This EMP would, as enivisaged herein, work. Use it. Enough corporate spying, prying and lying.
Derin corax6 years ago
what is a emp generator?i know i am dumb
EMP is shorthand for "electromagnetic pulse". In Ocean's eleven, they used a generator the size of a van to knock out the casino's power grid (along with half the city's! ;])
you also get an emp from a nuke going off
not just any nuke it would have to be a ytterbium core HE rail nuke.
this is not necessarily true, any nuclear weapon with sufishint gamma output that is detonated above ~15km will produce an EMP of significant power.
oceans is cool
emp stands for "Electromagnetic-Pulse" EMP pulses can knock out electronics such as radios and will make crt TV's
doesn't an EMP destroy capacitors or something? therefore rendering electronic equipment useless or is it just temporary?
I realize this is rather old, but EMP affects anything sensitive to sudden current spikes (i.e. semiconductors). Theoretically you *could* trash a capacitor with an induced current, but in reality all the transistors would explode far before a capacitor would catastrophically fail.

And @TheDeviant13: What do you mean "will make CRT TVs"? It will screw up the picture pretty bad, but that goes for all magnetic fields.
n3ldan (author)  Derin6 years ago
A little explanation to greasefire's response: Note that I am no expert on the subject; but I think I have a fairly accurate grasp on it. An electromagnetic pulse is a powerful magnetic field that, due to electromagnetic induction, creates a voltage differential between metal objects. For example, a large EMP near an RFID tag would create a voltage differential between different parts of the antenna, which could potentially fry the chip and or antenna.
This would absolutely work, in fact, i made one work using the individual charger output
~CableGuy1 year ago
Is it possible to give more voltage to the Camera Circuit for faster charge?
soheil1 year ago
Hmmm... I wasn't able to understand the "connecting the scr" part
What do you mean by attach the anode to the scr? do we attach the thing to itself?!
man22201 year ago
I have this set up to two AA and 29 330 v capacitors ranging from 160 to 80 uf and the transistor keeps smoking and the board stops working giving me almost no charge can anyone help?
liddleLOL2 years ago
I need help:

I am making a charging circuit for a coilgun, but i accidentally bought non polar caps. I was wondering if i could still use these with some sort of circuit adjustment, or if i need to purchase all new polarized caps? Can you help?
Any idea where I can get these cameras free? Walmart will not give them away.
if anyone can get a large amount of these used disposable cameras say 50 i am willing to pay $10 for them seeing that your getting them for free and that should cover shipping
If you pumped all of the power in the bank into a tiny tiny gauge wire, what would happen?
tulavatalo5 years ago
the nuke creates a emp that krashes most elektronik devices in a raduis of 10km
a nuke would fry way more than stuff in 10 km radius
it depends on the altitude of the detonation a nuke is often detonated about 500 m above ground but if you blow a nuke at 10km altitude it would take out eny not shilded electronics in an area the sise of usa
exactly
right before it blew you to pieces
Actually no.

An EMP is generated from a nuclear device being detonated at altitude. It's also known as an "airburst" In the Cold War days it was thought that Soviet forces would lead a nuclear attack with a series of airbursts to knock out civilian infrastructure. The actual effects of the blast is not very great because they don't have to use a "city buster" (a device in the megaton range) to get the same effect, so the heat, blast and all of that wouldn't be as great because it's fairly high up (think miles).

How do I know this? I was in the military and it was my job to know.
are u watched future weapons on discovery channel xD
jepp
Coindude193 years ago
I found some high-voltage capacators from old adapters to computers and video consules and one of them reads 400v and 68 uf
ARJOON3 years ago
fake. Your circuit is a broken one. This ciruit dont work because there is no component on it. IF there was on the bottom it would be elevated but nice intructable maybe you replaced the circuit with a new one.
fundash3 years ago
be carfull with this, those wires are pretty close!
bigpinecone7 years ago
ALWAYS, UNDER ANY CIRCUMSTANCE, DISCHARG EACH CAPACITOR BEFORE DOING ANYTHING WITH IT. I SHOCKED MYSELF WHILE MAKING A FLASHGUN, AND IT HURT LIKE HELL, WITH ONE CAP.
what is the best way to do this
screwdriver on the leads.
like 1 screwdriver connecting the leads or just touch 1 then the other
'cross the leads.
 With your finger
lol id laugh if someone actually did that and kept trying like "for some reason my capacitors aren't discharging"
is how much it holds the v or uf on the side of the conductor
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!