Print PDF
Favorite
Email
Step 6Finishing the table
This is a much anticipated moment after all those hours of crafting !
- Glue your chessboard on the table top
- Insert the plexiglas sheet on top of the chessboard
- If you're really concerned about liquids, you could use a silicon-based paste to seal the junction between the plexiglas and the table
I didn't do it, the plexiglas fit tightly in the hole.
- I put some of those felt tabs (I don't know the exact term) beneath the table feet, so that it stays silent when slided on the floor.
You're done !
- Glue your chessboard on the table top
- Insert the plexiglas sheet on top of the chessboard
- If you're really concerned about liquids, you could use a silicon-based paste to seal the junction between the plexiglas and the table
I didn't do it, the plexiglas fit tightly in the hole.
- I put some of those felt tabs (I don't know the exact term) beneath the table feet, so that it stays silent when slided on the floor.
You're done !
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
