Introduction: Parts You Need
You will need .
Scrap wood
Chicken nipple
Strip light clamp
Screws
Kids drinks bottle
Chicks to drink from it
Step 1: Scrap Wood
You will need scrap wood any size will do as long as the ends are cut strait .
Screw the wood together into a L shape .
Step 2: Attaching Clip
Screw the strip light clip onto wood at the top about 4 inches from the bottom plank .
I got my clip from the fish tank shop but they sell them at most hardware shops .
Step 3: Chicken Nipple
Chicken nipples are not as perverted as they sound they are cool little plastic do-dads that drip water when you touch the little protruding metal shaft . You will get funny looks asking for them at the pet store so best order them from ebay for about £1 for 4 .
All you do is drill a small home in the bottle top and screw in your nipple .
Step 4: Putt It Together
Screw your cap onto your small bottle clip it to your holder and your done . Don't forget to fill it up first tho .