Step 3: Connect your legs
Next position the legs under the table. I made matching marks on both sides of the table top.
All I had to do was, position the legs in the marks on the bottom of the table top.
With the legs positioned properly, I counter sank two deck screws into each leg.
This is what it looked like after all the legs were screwed in.
All I had to do was, position the legs in the marks on the bottom of the table top.
With the legs positioned properly, I counter sank two deck screws into each leg.
This is what it looked like after all the legs were screwed in.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
