This knife is made from mild steel. I cut it out with an angle grinder. I shaped it with an angle grinder.I used my belt sander to grind the bevel on side, like a chisel. I used a waxy tropical wood. the pins are 1/4 brass. I epoxied it all together and shaped it with a belt sander and then sandpaper I finished it with linseed oil as always.

About This Instructable


19 favorites


Bio: I enjoy the outdoors. Camping, fishing, canoeing, all of it. I love working with my hands. I take on any project. I love to work ... More »
More by Basement_Craftsman: Leaf Spring to Gurkha Khukri Upcycled Bowie Knife How To Make a Sword: A Comprehensive Guide
Add instructable to: