Christmas Lights to Music Using Arduino

Step 5 Connect to the SSRs

I used the extra breadboard jumper wires I had to connect the following:

WaveShield (these can be changed but I used the defaults)
D2 - LCS
D3 - CLK
D4 - DI
D5 - LAT

First 3 SSR Channels
D6 - Channel 1
D7 - Channel 2
D8 - Channel 3

WaveShield
D10 -> LCS

WaveShield - SD Card (cannot be changed)
D11
D12
D13

Power
Gnd[0] - SSR Ground

Vu Meter
A0 - Connect to R7 (1.5K resistor) on the WaveShield to measure output from amplifier.

Remaining 5 SSR Channels
A1 = D15 - Channel 4
A2 = D16 - Channel 5
A3 = D17 - Channel 6
A4 = D18 - Channel 7
A5 = D19 - Channel 8