Introduction: Christmas Tree

Picture of Christmas Tree

Cool Christmas Tree designed and 3D printed by Airwolf 3D!

With Christmas right around the corner, what better to print than a Christmas tree?!

Download the files and print out your own!

Step 1: Print Out the Parts

Picture of Print Out the Parts

Star: PLA- Yellow

Tree: PLA- Green

Stand: Laywood

M3x25mm screw (x1)

Step 2: Assemble

Picture of Assemble

1. Thread the screw through the base and into the bottom of the tree

2. Glue the star on the top of the tree

Step 3: Hang on the Tree!

Picture of Hang on the Tree!

Hang the beautiful part on the tree!

Comments

seamster (author)2014-11-11

A tree on a tree.... mindblown! ;)

Very cute ornament. Good luck in the challenge!

About This Instructable

278views

2favorites

License:

Add instructable to: