Instructables

Step 14: Attach the cable

Picture of Attach the cable

Peel back the jacket of the USB cable to expose 4-colored wires.

Attach these wires to the circuit board as follow:

Green - 2N3904 transistor ground
White - Junction of 0.1uF and 10K resistor
Red - SPST 5V relay switch
Black - Circuit ground

...or just look at the schematic again.

 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!