Introduction: Classroom Bow
Step 1: Step1 Equipment
First you need a half sheet of paper, scissors,a rubber band, and tape. ( All stuff you can get in a classroom henceforth the name classroom bow.)
Step 2: Step 2 the Bow
Fold the half sheet in half. Then roll it up until it looks like ( see picture above)
Step 3: Step 3 Taping the Bow
Tape up all edges and sides and then bend it. The bow sometimes is too long so go ahead and cut it.
Step 4: Step 4 "stringing" the Bow
Now cut your rubber band at the top once. Now tie off the ends of your bow.
Step 5: Step 5 Finished Product
If you have your ends tied off well, go ahead and shoot. This is my first instructable so go ahead and write back to me what you think about it.