Classroom Cannon (bic M10 Clic)

10,785

11

14

Published

Introduction: Classroom Cannon (bic M10 Clic)

This is a simple and powerfull BIC pen cannon
I hope you like this
Please Note:I AM NOT REPONSIBLE FOR BLINDNESS OR INJURIES
:P Be safe and have FUN

Step 1: You Will Need

You will need:
A bic pen as shown below
A brain !


And thats it really it is im not joking !

Step 2: Crack It!

Now you will need to crack the clear bit off.
You will have to put some muscle into it!
Ok The will probibally be some of the clear plastic left inside the blue tube you will need to get that out.I leaving that to you how you do it!

Step 3: You Will Need These Parts From the Pen

These are the parts you will be needing (see below)

Step 4: Preparation

First you will need to drill (or make bigger) the smal hole untill the ink tunbe fits in nicely.
I used a inkjet refill drill but you can use anything.

Step 5: More Preparation!

Now you will ned to insert the sprin into the blue tube.
Then the ink tube,ball point first.
The you will nedd to put the projectile the little clear thing on the end.

If oyu do not understand these steps see photo's below

Step 6: Finished

So now your finished i shall tell you how to fire it.
To fire the cannon pull down on the ink tube and you will see what happens next.
To reload simply place the clear cap thingy back on the ink tube .
Sometimes the spring will fly out too i am working on something to stop this so bare with me.
Oh Yeah one last thing .
HAVE FUN

Share

    Recommendations

    • Stick It! Contest

      Stick It! Contest
    • Woodworking Contest

      Woodworking Contest
    • Pets Challenge

      Pets Challenge
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    14 Comments

    ima firin my pen gun!!!!!!!!!!!!!!!!!!

    where can you buy an m10 pen????????????????????????????????????

    all you said you needed was the pen and a brain

    i didnt think you would have drills in school if you were making it at school

    user

    may you can glue the spring in it????

    you should include that you need a drill for this too.

    So it should be more powerful than the G2 pen gun. Right?

    I it easier to use a normal bic click but good instructable

    yea i always do this.

    imo waste of a pen but it is still a good instructable

    Hehehe, this makes me remember all the screams of annoyance i created in the classroom..

    2 replies

    LOL Good Job ;)

    I thought so too at the time..