Print PDF
Favorite
Email
Step 2Destruction!
Time to take apart that old NES controller and that brand new hub.
Cut that NES controller Wire. It's just in the way. Save it you may find something to do with it later.
Remove the screws from the back of the NES controller as well as the USB Hub.
Remove the screw from the circuit boards of both the controller and USB Hub. Toss the case or keep it for a later project. It does have a nice little USB holder on the back you may be able to reuse.
Now there is something wrong with the hub board so be GENTILE!
Cut that NES controller Wire. It's just in the way. Save it you may find something to do with it later.
Remove the screws from the back of the NES controller as well as the USB Hub.
Remove the screw from the circuit boards of both the controller and USB Hub. Toss the case or keep it for a later project. It does have a nice little USB holder on the back you may be able to reuse.
Now there is something wrong with the hub board so be GENTILE!
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
2
Nov 13, 2009. 12:41 AMphilslizzy
says:
Quote: "be GENTILE" I am luckily.
Reply
 |
Add Comment
|
