Print PDF
Favorite
Email
Step 8
After you have all the springs in the correct holes and seated properly, let's put the board back together. First put the bottom half of the keyboard nearby. Then take ONLY the grey liner and flip it over so it's sitting on all those springs that are finally under control, and line it up with the holes. Then take the bottom half of the keyboard, flip it over, and it will slide into place as the latches fall into their correct holes. If anything catches, pull it back out and re-place the grey liner; you didn't come this far to mess up now.
With the keyboard still inverted and resting on the props, click the latches into place. Now you can pick it up.
With the keyboard still inverted and resting on the props, click the latches into place. Now you can pick it up.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
