Next thing we need to do is to put the VMU slots back onto the circuit board and then install that into the controller. The first part is pretty easy,...
Step 4: Reassembly
After all of the water has evaporated, you can move on to putting the
controller back together. First thing to do is to put the dpad and
triggers back together. The triggers should just snap back together, but
it might take a little but of force. For the analog stick you want to
follow this order: base plate, ball with stick, collar (slot goes up),
spring, upper housing, and finally the thumbstick. Simply screw the
triggers and analog stick back on the way they came off.