Instructables

Step 2: Design

Before I began making the clock I had no idea what to make. The two things I knew were that I wanted to make the sub associations logo out of steel and that I didn't want to spend any money.

In the study associations workshop were lots of steel strips so I wanted to use them. The new room was decorated in a modern style and there was a stroke of concrete visible where I thought the clock would look good. At this point I made a design in photoshop were I would work with. After creating the first metal parts I adjusted the design to the design below.
 
Remove these adsRemove these ads by Signing Up

Step 2: Design

Before I began making the clock I had no idea what to make. The two things I knew were that I wanted to make the sub associations logo out of steel and that I didn't want to spend any money.

In the study associations workshop were lots of steel strips so I wanted to use them. The new room was decorated in a modern style and there was a stroke of concrete visible where I thought the clock would look good. At this point I made a design in photoshop were I would work with. After creating the first metal parts I adjusted the design to the design below.
 
Remove these adsRemove these ads by Signing Up

Step 2: Design

Before I began making the clock I had no idea what to make. The two things I knew were that I wanted to make the sub associations logo out of steel and that I didn't want to spend any money.

In the study associations workshop were lots of steel strips so I wanted to use them. The new room was decorated in a modern style and there was a stroke of concrete visible where I thought the clock would look good. At this point I made a design in photoshop were I would work with. After creating the first metal parts I adjusted the design to the design below.
 
Remove these adsRemove these ads by Signing Up

Step 2: Design

Before I began making the clock I had no idea what to make. The two things I knew were that I wanted to make the sub associations logo out of steel and that I didn't want to spend any money.

In the study associations workshop were lots of steel strips so I wanted to use them. The new room was decorated in a modern style and there was a stroke of concrete visible where I thought the clock would look good. At this point I made a design in photoshop were I would work with. After creating the first metal parts I adjusted the design to the design below.
 
Remove these adsRemove these ads by Signing Up
Clock with steel helmet logo : Design
Instructables

500 Servlet Exception

java.lang.IllegalStateException: forward() not allowed after buffer has
committed.
	at com.caucho.server.webapp.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:139)
	at com.caucho.server.webapp.RequestDispatcherImpl.error(RequestDispatcherImpl.java:113)
	at com.caucho.server.webapp.ErrorPageManager.sendServletError(ErrorPageManager.java:362)
	at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:175)
	at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:229)
	at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:274)
	at com.caucho.server.port.TcpConnection.run(TcpConnection.java:514)
	at com.caucho.util.ThreadPool.runTasks(ThreadPool.java:527)
	at com.caucho.util.ThreadPool.run(ThreadPool.java:449)
	at java.lang.Thread.run(Thread.java:662)

Resin Professional 3.0.28 (built Mon, 18 May 2009 02:21:41 PDT)