CloroxBot Recycled Giant Robot Costume!

Step 6 Robo Head

This was my favorite part. I started off with the largest clorox bleach bottle I could find. I cut out the back and crammed it over my fat head. I used a marker to not where the eye holes should be. From there I used a heat gun and warped the front piece out a little and made the back a little larger. I cut a hole through the eye holes and placed some red transparency film over it so you couldn't see my eyes, I also put a bottle cap higher on the head (see final pictures) and a few other cometic plastic pieces. Once again, use your imagination.