Print PDF
Favorite
Email
Step 5Strip and Tin
Strip the ends of the wire according to the connectors you are using. My banana connectors need about 1/4in. bare wire.
Tin the ends of the wire by heating with a soldering iron and adding just enough solder to fill the voids in between the strands of wire.
For these connectors, it will give the set screw something to bite into. For solder type connectors it will make soldering easier.
Tin the ends of the wire by heating with a soldering iron and adding just enough solder to fill the voids in between the strands of wire.
For these connectors, it will give the set screw something to bite into. For solder type connectors it will make soldering easier.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
