Introduction: Coat Rack

Step 1: Tools

Jig saw
Drill
Belt sander

Step 2: Materials

1 pallet board
Stain
Varnish
6 coat hooks
Picture fixings

Step 3: Assemble

Pretty simple project.
Using the jig saw, cut the board to create an old wooden board shape.
Then using a belt sander with a 40grit. Take back and round off the edges.
Now sand the whole thing with 80grit through to 240grit
Stain and varnish
Screw the fixings first
Then the hooks and mount to the wall.
Job done

Comments

author
transforming vintage (author)2014-02-01

never thought of using a jigsaw to cut board in the shape. looks really good.

About This Instructable

1,593views

24favorites

License:

More by simon4480lamkin:Pallet Wave Speaker BoxCoat RackPallet Side Tables
Add instructable to: