Print PDF
Favorite
Email
Step 2Prepping the Case
Take the carrier tray and place the computer parts inside of it like the picture shows. Because your computer differs from mine, the configuration will slightly vary, so just use my picture as a guideline.
I first layered down the mother board and marked off where to make the cuts on the outside of the case. I then placed the fan's and power supply around the mother board. The CD drive was layered on top of the power supply. I also took the USB and audio jack and placed them in the front along with the power button and DVD player.
Mark off the areas where you think you will need to cut out for access to the computer.
I first layered down the mother board and marked off where to make the cuts on the outside of the case. I then placed the fan's and power supply around the mother board. The CD drive was layered on top of the power supply. I also took the USB and audio jack and placed them in the front along with the power button and DVD player.
Mark off the areas where you think you will need to cut out for access to the computer.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
