Print PDF
Favorite
Email
Step 4Layer Case
In this step you will layer the bottom of the case with wire mesh to prevent dust from getting into the case. Use either an Epoxy or spray Glue to keep the mesh down.
After the mesh dried in place I put all of the internal components back into the case and harnessed them down with zip ties and epoxy. **I am not responsible for electrocution.
After the mesh dried in place I put all of the internal components back into the case and harnessed them down with zip ties and epoxy. **I am not responsible for electrocution.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
