Coffee Cup Challenge! Water Purifier

Step 3: Assembly

Picture of Assembly
now assembly can Happen.
 Put the 24 oz can bottom in the cup and have the straw come out the side of the cup. The seal between the paper cup and the 24 oz can is not important. The seal between the straw and paper cup is important so be sure to tape it up. Fill the 12 oz can bottom with water, about an inch deep. Put the 12 oz can bottom on the bottom of the paper cup. Make sure its a tight fit so there is no steam leaking. Put a top on top of the cup and tape it up so there is not leaks. 

Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!