Introduction: Coin Collector With Arduino and Processing

The coin collector “CH-926 Coin Collector” was manufactured by the company Coin Selector and can be configured to recognise up to three different coins.

After configuration, the coin collector returns certain pre-configured pulse values for each coin types. This output pulse signal can in turn be interpreted programmatically by the Arduino IDE.

The Arduino IDE sends it's data to the LCD and Processing, where you can see your output.

Step 1: The Machine

This will you be needing:

Step 2: Building

Step 3: Programming: Arduino UNO

Download the file (sry for german cmnts) and test it out!

Step 4: Programming: Processing

I am not allowed to send you the code for the Processing work, but i can show you the final version.

Step 5: Done.



About This Instructable




More by NikolaiM:Coin Collector With Arduino and Processing
Add instructable to: