Print PDF
Favorite
Email
Step 2Make the wing frame
Make one wing frame.
First I made the outer frame out of the thickest gauge wire. I then added a second frame on 2 of the three sides in sort of a wedge (see second photo) for some strength and then connected the two.
Then I added the center rib running down the length of wing and the ribs running up and down the wing. These will be useful to attach the "feathers".
Lastly I added the handle to the end.
I did this sort of by eye and then matched the second one to the first.
First I made the outer frame out of the thickest gauge wire. I then added a second frame on 2 of the three sides in sort of a wedge (see second photo) for some strength and then connected the two.
Then I added the center rib running down the length of wing and the ribs running up and down the wing. These will be useful to attach the "feathers".
Lastly I added the handle to the end.
I did this sort of by eye and then matched the second one to the first.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
