Cool Coke Wall Design

 by BrettMan22
Intro

Okay so I am new and I decided to put something up that I built on my own time when I thought it looked cool. the hole point of this was to keep it from ending up in a land fill and the rest of the cans I drink I just put in the recycle bin.
 
Remove these adsRemove these ads by Signing Up

Step 1: What you need.

What you need.

- Coke cans - or any soda Can that is 12 FL OZ (355mL)
- Duck tape
- A Wall or a desk wall to!!
- Time and about 2 weeks worth of drinking - Or if you recycle then take them out of the recycle bin and was them and save more time !!!!
beehard44 says: Mar 11, 2010. 6:11 AM
Typos typos typos.... They're everywhere, but this 'ible was funny:
step 3: ....long peace of duck tape....
step 4:...firmly agents the wall.....
PyroTeen213 in reply to beehard44Jul 17, 2010. 6:32 PM
I know this post was really old but duck tape is right and so is duct tape. In WW2 they needed a water proof tape, so we made duck tape. It got its name because water would run straight down it like on a duck's back. It later became known as duct tape because it worked to seal up ducts.
bobbyk881 says: Feb 28, 2009. 6:56 AM
put foam in it an make it have insolation.
Mattrox in reply to bobbyk881Aug 2, 2009. 6:14 PM
Incoming solar radition???? Do you mean insulation.
beehard44 in reply to MattroxMar 11, 2010. 6:13 AM
radiation?
Mattrox in reply to beehard44Mar 14, 2010. 12:00 AM
Oops
Mattrox in reply to beehard44Mar 13, 2010. 11:59 PM
lol
sharlston says: Aug 22, 2009. 12:11 PM
at my dads work theres loads of empty cans about 6 meter high and some stupid person decided jum into the crate and ya can see his body in the cans he works in the rexam factory making cans
donaoh says: Aug 20, 2009. 12:20 PM
I covered the walls in my room this way before. To stop the cans falling down, i put a length of sellotape over the top, then ran the remainder sellotape onto the wall above where the can was to be placed. I collected cans from all over the world so i had cans other than cans made by the coca cola company and club orange company. I kept the bottom layer removable so i could put in full cans so i would not need to go to the kitchen. I left gaps inbetween the cans and put my collection of beanie toys, they blended in well, in a pop art kinda way. Will try and dig out a picture to show you what i mean.
ac1D says: Feb 27, 2009. 12:45 PM
Nice idea, but what happen if something hit them? need to start over lol.
BrettMan22 (author) in reply to ac1DFeb 27, 2009. 2:39 PM
No lol I saw this question coming If you do it right and stack them on top of each other and the duck tape should hold it.
ac1D in reply to BrettMan22Feb 28, 2009. 3:53 PM
but but, if they get crushed!
Tommyhzy in reply to ac1DAug 8, 2009. 4:02 PM
I was thinking about that too, what if you trip and ... Crush! "Nooooo!!! My wall! I crushed my wall!" And you have to replace the cans. Yay I replied to a comment written 5-1/2 months ago! How's it going? (I mean, how WAS it going?) :)
ac1D in reply to TommyhzyAug 9, 2009. 3:45 PM
Atough I sold it with the time, I have made this project. I filled all the can with sand so they don't get crushed ;) It worked!
BrettMan22 (author) says: Feb 28, 2009. 4:06 PM
Ya the hole point was to make my little office space look nice if u want to see it go to my page i am taking a pix of it now
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!