Print PDF
Favorite
Email
Step 6Draw in the sides
When I first started sleeping on this bed, the slats at my butt would fall out randomly. I was puzzled. Eventually, they wouldn't even sit on the support anymore.
Use I for this.
It took me about 2 days of sleeping on the futon to realize that the sides were bowing out. This is easily fixed with the application of 550 cord. A solid length around the center of the bed frame pulling the sides together solves all of the problems (it actually pulls the sides in some, and makes it tighter).
I could have used another method to stiffen the sides, but that would make the bed harder to move, so I opted against it.
Use I for this.
It took me about 2 days of sleeping on the futon to realize that the sides were bowing out. This is easily fixed with the application of 550 cord. A solid length around the center of the bed frame pulling the sides together solves all of the problems (it actually pulls the sides in some, and makes it tighter).
I could have used another method to stiffen the sides, but that would make the bed harder to move, so I opted against it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
