Instructables

Color up Your Xbox 360 controller!

Step 5: Clear coat it !

Picture of Clear coat it !
Now that it is taped up. And you design is all done, you now need to take you controller part and place it on newspaper and spray it with clear coat. I would suggest 3-4 coats of it. You will know when its ready because it will be shinny.

SPRAY BACK AND FORTH SO IT WILL NOT GLOB UP!
 
Remove these adsRemove these ads by Signing Up
thegamer012 years ago
Do you have to tape it and clear coat it if you are using a broken Xbox 360 controller that got soda all over it?
bhitson3 years ago
why do you have to gut it out? i plan on using markers. do they have to be permanent (like a sharpie)
tysonhe04 years ago
I reckon put a Halo Spartan on it lol
doomsdayltd4 years ago
 hey i bought testor's clear gloss spray do's that wok to?
beauwalker23 (author)  doomsdayltd4 years ago
Should work out fine. As long as its clear coat.
 kewl thanks  




@:^) look elvis